Lo-tech ISA XT CF Adapter rev. 3

While this card will work in virtually any PC with an ISA slot, it is primarily intended for PCs which do not, or cannot support IDE and have a smaller data bus such as the IBM XT or clones. For best performance, you should try to get at least a 16-bit interface for...

Lo-tech ISA XT CF Adapter rev. 3

While this card will work in virtually any PC with an ISA slot, it is primarily intended for PCs which do not, or cannot support IDE and have a smaller data bus such as the IBM XT or clones. For best performance, you should try to get at least a 16-bit interface for...

Lo-Tech 2MB EMS Memory Board for 8 & 16 bit ISA Slots

This card should work in pretty much any machine with an ISA slot, but it will be much slower than using conventional RAM. The top 384k is typically reserved for BIOS, leaving the lower 640k available for applications.

Lo-Tech 2MB EMS Memory Board for 8 & 16 bit ISA Slots

This card should work in pretty much any machine with an ISA slot, but it will be much slower than using conventional RAM. The top 384k is typically reserved for BIOS, leaving the lower 640k available for applications.

Assembled Tested & Working Lo-tech XT-CF Adapter for Tandy 1400 Laptops

*CF Card is not included, photo provided for example only* *PLEASE NOTE: Due to a shortage of ROM chips you may receive our SMT PCB Replacement ROM instead of the DIP ROM chip installed on the card pictured. The SMT PCB Replacement ROM is pictured in the last photo....